00184 - ZALDI JUMPING SADDLE LASARTE
#WeThinkSaddles
In Zaldi we consider the saddle as the joint element between horse and rider.
Following our T+T Tradition and Technology premise, into this cool new collection we have incorporated leading technological developments together with the most advanced veterinary and medical research, additionally applying the guidelines of the greatest saddle-fitters of international prestige. 50 years of experience as saddlers and our condition of manufacturers, allow us to launch this new line of customized saddles ¡We are saddlers!
Attractive jumping saddle fully configurable to rider and horse measurements. Customized options at an extra cost. Choose tree, size (horse/rider), stirrup bar, seat, flaps leather, panels, knee rolls, girth straps and leather as you wish.
The new jumping saddle LASARTE, in the picture, has been manufactured with a fixed semi-deep saddletree made of EPDM polypropylene. Saddletree guaranteed for 10 years.
With 5-multipositional safety stirrup bar. Extra-comfortable seat. With white piping, stitching and cantle.
Made of boxcalf leather, mixed panel made of rubber & wool, with velcro for the option multipositional and refillable panel.
Front flap for dressage, with outside Zaldi-Star kneepad, sewn outside the flap. The back kneepad is also in Zaldi-Star style, inside the flap.
Short girth straps, multiposition and easily changeable.
Available sizes:
- Rider: 17" - 17,5" - 18"
- Horse: 28 - 34 cm
Colours: Black, Havana, Brown, Dark London.
APPROXIMATE MEASUREMENTS OF THIS SADDLE IN 17":
-Measurement of the seat: 43cm, from the cantle to the Zaldi nail
-Length of the panel in the underside: 45cm
-Length of the flap (down from the stirrups bar): 37cm
-Inside Kneepad: 13cm high x 6cm wide x 4cm projection
-Inside Backpad: 11cm high x 5cm wide x 4cm projection
-Saddle Support Area: 39cm
-Weight: 5.400kgs
NOTICE: It is very important to send your order of a saddle with its configuration sheet properly filled. The saddle in the publicity picture, related to this reference on our website, is configured with the options marked in the following pictures. You can enlarge them to see them carefully.
#WeThinkSaddles
In Zaldi we consider the saddle as the joint element between horse and rider.
Following our T+T Tradition and Technology premise, into this cool new collection we have incorporated leading technological developments together with the most advanced veterinary and medical research, additionally applying the guidelines of the greatest saddle-fitters of international prestige. 50 years of experience as saddlers and our condition of manufacturers, allow us to launch this new line of customized saddles ¡We are saddlers!
Attractive jumping saddle fully configurable to rider and horse measurements. Customized options at an extra cost. Choose tree, size (horse/rider), stirrup bar, seat, flaps leather, panels, knee rolls, girth straps and leather as you wish.
The new jumping saddle LASARTE, in the picture, has been manufactured with a fixed semi-deep saddletree made of EPDM polypropylene. Saddletree guaranteed for 10 years.
With 5-multipositional safety stirrup bar. Extra-comfortable seat. With white piping, stitching and cantle.
Made of boxcalf leather, mixed panel made of rubber & wool, with velcro for the option multipositional and refillable panel.
Front flap for dressage, with outside Zaldi-Star kneepad, sewn outside the flap. The back kneepad is also in Zaldi-Star style, inside the flap.
Short girth straps, multiposition and easily changeable.
Available sizes:
- Rider: 17" - 17,5" - 18"
- Horse: 28 - 34 cm
Colours: Black, Havana, Brown, Dark London.
APPROXIMATE MEASUREMENTS OF THIS SADDLE IN 17":
-Measurement of the seat: 43cm, from the cantle to the Zaldi nail
-Length of the panel in the underside: 45cm
-Length of the flap (down from the stirrups bar): 37cm
-Inside Kneepad: 13cm high x 6cm wide x 4cm projection
-Inside Backpad: 11cm high x 5cm wide x 4cm projection
-Saddle Support Area: 39cm
-Weight: 5.400kgs
NOTICE: It is very important to send your order of a saddle with its configuration sheet properly filled. The saddle in the publicity picture, related to this reference on our website, is configured with the options marked in the following pictures. You can enlarge them to see them carefully.
Alto:
Ancho:
Fondo:
Largo:
Ancho:
Fondo:
Largo:
Leather colours
It is impossible to get two items made of tan, dark tan, brown or Havana leather exactly the same colour.
Every piece of leather is different
A saddle is made from different types of leather, some parts of the saddle – for example seat, flaps, panels, girth straps, require leather giving different characteristics compared to other parts. We need to use different leather types for different parts, which means leather from different animals, different suppliers, different tanning processes or tints. So it is impossible to achieve exactly the same colour.
For a group of products such as a saddle, bridle, girth, reins there will always be different nuances in colour. So for example a tan bridle, saddle and girth will be in a tan spectrum but there will be variations in the actual colour, including the saddle which has to be made of different grades of leather, giving different shades.
It is the same with clothing, a cotton polo shirt in blue, will be a different shade to a blue jumper or a pair of trousers. All will be blue but different shades of colour because of the different materials.
So when ordering a saddle, or any other leather item, it is necessary to take into account that it is not possible to guarantee an exact match of colour.
The colours shown in the catalogue photographs are for guidance
In our catalogue (including social media and our website www.zaldi.com) we use digital printing to show the ranges of colours available, but this is for guidance as the colours can vary depending on the set up of each computer screen or mobile phone display. Also taking into account the differences in perception from one person’s eye to another we can only give the colours as a guide. To get a 100% colour match to the original is impossible.
0 MINUTE
When you put your new saddle on the horse, it seems that it does not fit at all… It is necessary a bit of time for it to fit… Relax!
1-15’ MINUTES
Girth your saddle, although it will be a bit loose and it seems it does not fit yet. Don’t despair! Get on the horse…
15 - 60’ MINUTES
The panels start to adapt to the back of the horse in the correct way. It is possible now to girth it one or two holes tighter.
5 - 10 HOURS
While riding, the saddle continues to adapt. The distribution through the panels of our weight helps to reach a perfect a fitting and adaptation. We can adjust the girth a bit more.
+15 H HOURS
We get an ideal fitting. We feel comfortable on the saddle while it rests/leans where and how it should on the back of the horse. We can now adjust the girth firmly.
DON´T DESPAIR!! Remember that there is a necessary fitting time. Trust ZALDI!!!
00184 - ZALDI JUMPING SADDLE LASARTE
#WeThinkSaddles
In Zaldi we consider the saddle as the joint element between horse and rider.
Following our T+T Tradition and Technology premise, into this cool new collection we have incorporated leading technological developments together with the most advanced veterinary and medical research, additionally applying the guidelines of the greatest saddle-fitters of international prestige. 50 years of experience as saddlers and our condition of manufacturers, allow us to launch this new line of customized saddles ¡We are saddlers!
Attractive jumping saddle fully configurable to rider and horse measurements. Customized options at an extra cost. Choose tree, size (horse/rider), stirrup bar, seat, flaps leather, panels, knee rolls, girth straps and leather as you wish.
The new jumping saddle LASARTE, in the picture, has been manufactured with a fixed semi-deep saddletree made of EPDM polypropylene. Saddletree guaranteed for 10 years.
With 5-multipositional safety stirrup bar. Extra-comfortable seat. With white piping, stitching and cantle.
Made of boxcalf leather, mixed panel made of rubber & wool, with velcro for the option multipositional and refillable panel.
Front flap for dressage, with outside Zaldi-Star kneepad, sewn outside the flap. The back kneepad is also in Zaldi-Star style, inside the flap.
Short girth straps, multiposition and easily changeable.
Available sizes:
- Rider: 17" - 17,5" - 18"
- Horse: 28 - 34 cm
Colours: Black, Havana, Brown, Dark London.
APPROXIMATE MEASUREMENTS OF THIS SADDLE IN 17":
-Measurement of the seat: 43cm, from the cantle to the Zaldi nail
-Length of the panel in the underside: 45cm
-Length of the flap (down from the stirrups bar): 37cm
-Inside Kneepad: 13cm high x 6cm wide x 4cm projection
-Inside Backpad: 11cm high x 5cm wide x 4cm projection
-Saddle Support Area: 39cm
-Weight: 5.400kgs
NOTICE: It is very important to send your order of a saddle with its configuration sheet properly filled. The saddle in the publicity picture, related to this reference on our website, is configured with the options marked in the following pictures. You can enlarge them to see them carefully.
#WeThinkSaddles
In Zaldi we consider the saddle as the joint element between horse and rider.
Following our T+T Tradition and Technology premise, into this cool new collection we have incorporated leading technological developments together with the most advanced veterinary and medical research, additionally applying the guidelines of the greatest saddle-fitters of international prestige. 50 years of experience as saddlers and our condition of manufacturers, allow us to launch this new line of customized saddles ¡We are saddlers!
Attractive jumping saddle fully configurable to rider and horse measurements. Customized options at an extra cost. Choose tree, size (horse/rider), stirrup bar, seat, flaps leather, panels, knee rolls, girth straps and leather as you wish.
The new jumping saddle LASARTE, in the picture, has been manufactured with a fixed semi-deep saddletree made of EPDM polypropylene. Saddletree guaranteed for 10 years.
With 5-multipositional safety stirrup bar. Extra-comfortable seat. With white piping, stitching and cantle.
Made of boxcalf leather, mixed panel made of rubber & wool, with velcro for the option multipositional and refillable panel.
Front flap for dressage, with outside Zaldi-Star kneepad, sewn outside the flap. The back kneepad is also in Zaldi-Star style, inside the flap.
Short girth straps, multiposition and easily changeable.
Available sizes:
- Rider: 17" - 17,5" - 18"
- Horse: 28 - 34 cm
Colours: Black, Havana, Brown, Dark London.
APPROXIMATE MEASUREMENTS OF THIS SADDLE IN 17":
-Measurement of the seat: 43cm, from the cantle to the Zaldi nail
-Length of the panel in the underside: 45cm
-Length of the flap (down from the stirrups bar): 37cm
-Inside Kneepad: 13cm high x 6cm wide x 4cm projection
-Inside Backpad: 11cm high x 5cm wide x 4cm projection
-Saddle Support Area: 39cm
-Weight: 5.400kgs
NOTICE: It is very important to send your order of a saddle with its configuration sheet properly filled. The saddle in the publicity picture, related to this reference on our website, is configured with the options marked in the following pictures. You can enlarge them to see them carefully.
Alto:
Ancho:
Fondo:
Largo:
Ancho:
Fondo:
Largo:
