00183 - ZALDI DRESSAGE SADDLE ATLANTA
#WeThinkSaddles
In Zaldi we consider the saddle as the joint element between horse and rider.
Following our T+T Tradition and Technology premise, into this cool new collection we have incorporated leading technological developments together with the most advanced veterinary and medical research, additionally applying the guidelines of the greatest saddle-fitters of international prestige. 50 years of experience as saddlers and our condition of manufacturers, allow us to launch this new line of customized saddles ¡We are saddlers!
The innovative dressage saddle ATLANTA of the picture has been manufacture with CHANGE saddletree (exchangeable gullets), deep for dressage, made of polypropylene EPDM. Saddletree guaranteed for 10 years. The new DUAL DENSITY anatomical tree for horse and rider allows for many features of rigidity, deformation and absorption of energy where needed in different areas. The new tree has the ability to adjust completely to the back of the horse. It expands and spreads the rider´s weight over the horse´s back, so avoiding pressure points. The top side of the tree has been optimized in design (0.5cm thick) for rider comfort, it is elastic, absorbs shock and allows free passage of the horse´s energy. The rider contact area is ergonomically designed, lifting the lateral areas to release pressure on the urethra, so avoiding possible health problems in later years and allowing full and unrestricted blood flow.
With 5-multiposition stirrup bar. With extracomfortable seat with White piping, stitching and cantle.
Made from boxcalf leather. Short intelligent panels, whither pad incorporated. Consisting of 1cm layer ´memory foam´ wither pad with moisture resistant wool filling to avoid lumps or voids.
With a long ergonomic dressage flap and Londres type knee pad sewn outside the flap.
Long dressage girth straps, with the position of multiposition girth straps for an easy and quick change.
The saddle of the picture is customized with the option "special saddle for woman", 1cm wider between pipings, for adapting and protecting the feminine pelvic area.
Also available the standard width for men.
Knee rolls type. The saddle of the picture has been manufactured with TM-System (Thigh block), but you can choose among all these types of kneerolls:
SIZES:
- Rider: 17"- 17.5" - 18" (Check with us more available sizes)
- Horse: from 28 to 34 cm
Colours: Black, Havana, Brown, Dark London (check more color options).
APPROXIMATE MEASUREMENTS OF THIS SADDLE IN SIZE 17":
-Measurement of the seat: 43cm, from the cantle to the Zaldi nail.
-Length of the panel in the underside: 48cm
-Length of the flap (down from the stirrups bar): 40cm
-TM-System (Tight Block): 20cm high x 8.5cm wide x 9cm projection
-Weight: 7.800kgs
NOTICE: It is very important to send your order of a saddle with its configuration sheet properly filled. The saddle in the publicity picture, related to this reference on our website, is configured with the options marked in the following pictures. You can enlarge them to see them carefully.
#WeThinkSaddles
In Zaldi we consider the saddle as the joint element between horse and rider.
Following our T+T Tradition and Technology premise, into this cool new collection we have incorporated leading technological developments together with the most advanced veterinary and medical research, additionally applying the guidelines of the greatest saddle-fitters of international prestige. 50 years of experience as saddlers and our condition of manufacturers, allow us to launch this new line of customized saddles ¡We are saddlers!
The innovative dressage saddle ATLANTA of the picture has been manufacture with CHANGE saddletree (exchangeable gullets), deep for dressage, made of polypropylene EPDM. Saddletree guaranteed for 10 years. The new DUAL DENSITY anatomical tree for horse and rider allows for many features of rigidity, deformation and absorption of energy where needed in different areas. The new tree has the ability to adjust completely to the back of the horse. It expands and spreads the rider´s weight over the horse´s back, so avoiding pressure points. The top side of the tree has been optimized in design (0.5cm thick) for rider comfort, it is elastic, absorbs shock and allows free passage of the horse´s energy. The rider contact area is ergonomically designed, lifting the lateral areas to release pressure on the urethra, so avoiding possible health problems in later years and allowing full and unrestricted blood flow.
With 5-multiposition stirrup bar. With extracomfortable seat with White piping, stitching and cantle.
Made from boxcalf leather. Short intelligent panels, whither pad incorporated. Consisting of 1cm layer ´memory foam´ wither pad with moisture resistant wool filling to avoid lumps or voids.
With a long ergonomic dressage flap and Londres type knee pad sewn outside the flap.
Long dressage girth straps, with the position of multiposition girth straps for an easy and quick change.
The saddle of the picture is customized with the option "special saddle for woman", 1cm wider between pipings, for adapting and protecting the feminine pelvic area.
Also available the standard width for men.
Knee rolls type. The saddle of the picture has been manufactured with TM-System (Thigh block), but you can choose among all these types of kneerolls:
SIZES:
- Rider: 17"- 17.5" - 18" (Check with us more available sizes)
- Horse: from 28 to 34 cm
Colours: Black, Havana, Brown, Dark London (check more color options).
APPROXIMATE MEASUREMENTS OF THIS SADDLE IN SIZE 17":
-Measurement of the seat: 43cm, from the cantle to the Zaldi nail.
-Length of the panel in the underside: 48cm
-Length of the flap (down from the stirrups bar): 40cm
-TM-System (Tight Block): 20cm high x 8.5cm wide x 9cm projection
-Weight: 7.800kgs
NOTICE: It is very important to send your order of a saddle with its configuration sheet properly filled. The saddle in the publicity picture, related to this reference on our website, is configured with the options marked in the following pictures. You can enlarge them to see them carefully.
Alto:
Ancho:
Fondo:
Largo:
Ancho:
Fondo:
Largo:
Leather colours
It is impossible to get two items made of tan, dark tan, brown or Havana leather exactly the same colour.
Every piece of leather is different
A saddle is made from different types of leather, some parts of the saddle – for example seat, flaps, panels, girth straps, require leather giving different characteristics compared to other parts. We need to use different leather types for different parts, which means leather from different animals, different suppliers, different tanning processes or tints. So it is impossible to achieve exactly the same colour.
For a group of products such as a saddle, bridle, girth, reins there will always be different nuances in colour. So for example a tan bridle, saddle and girth will be in a tan spectrum but there will be variations in the actual colour, including the saddle which has to be made of different grades of leather, giving different shades.
It is the same with clothing, a cotton polo shirt in blue, will be a different shade to a blue jumper or a pair of trousers. All will be blue but different shades of colour because of the different materials.
So when ordering a saddle, or any other leather item, it is necessary to take into account that it is not possible to guarantee an exact match of colour.
The colours shown in the catalogue photographs are for guidance
In our catalogue (including social media and our website www.zaldi.com) we use digital printing to show the ranges of colours available, but this is for guidance as the colours can vary depending on the set up of each computer screen or mobile phone display. Also taking into account the differences in perception from one person’s eye to another we can only give the colours as a guide. To get a 100% colour match to the original is impossible.
0 MINUTE
When you put your new saddle on the horse, it seems that it does not fit at all… It is necessary a bit of time for it to fit… Relax!
1-15’ MINUTES
Girth your saddle, although it will be a bit loose and it seems it does not fit yet. Don’t despair! Get on the horse…
15 - 60’ MINUTES
The panels start to adapt to the back of the horse in the correct way. It is possible now to girth it one or two holes tighter.
5 - 10 HOURS
While riding, the saddle continues to adapt. The distribution through the panels of our weight helps to reach a perfect a fitting and adaptation. We can adjust the girth a bit more.
+15 H HOURS
We get an ideal fitting. We feel comfortable on the saddle while it rests/leans where and how it should on the back of the horse. We can now adjust the girth firmly.
DON´T DESPAIR!! Remember that there is a necessary fitting time. Trust ZALDI!!!
00183 - ZALDI DRESSAGE SADDLE ATLANTA
#WeThinkSaddles
In Zaldi we consider the saddle as the joint element between horse and rider.
Following our T+T Tradition and Technology premise, into this cool new collection we have incorporated leading technological developments together with the most advanced veterinary and medical research, additionally applying the guidelines of the greatest saddle-fitters of international prestige. 50 years of experience as saddlers and our condition of manufacturers, allow us to launch this new line of customized saddles ¡We are saddlers!
The innovative dressage saddle ATLANTA of the picture has been manufacture with CHANGE saddletree (exchangeable gullets), deep for dressage, made of polypropylene EPDM. Saddletree guaranteed for 10 years. The new DUAL DENSITY anatomical tree for horse and rider allows for many features of rigidity, deformation and absorption of energy where needed in different areas. The new tree has the ability to adjust completely to the back of the horse. It expands and spreads the rider´s weight over the horse´s back, so avoiding pressure points. The top side of the tree has been optimized in design (0.5cm thick) for rider comfort, it is elastic, absorbs shock and allows free passage of the horse´s energy. The rider contact area is ergonomically designed, lifting the lateral areas to release pressure on the urethra, so avoiding possible health problems in later years and allowing full and unrestricted blood flow.
With 5-multiposition stirrup bar. With extracomfortable seat with White piping, stitching and cantle.
Made from boxcalf leather. Short intelligent panels, whither pad incorporated. Consisting of 1cm layer ´memory foam´ wither pad with moisture resistant wool filling to avoid lumps or voids.
With a long ergonomic dressage flap and Londres type knee pad sewn outside the flap.
Long dressage girth straps, with the position of multiposition girth straps for an easy and quick change.
The saddle of the picture is customized with the option "special saddle for woman", 1cm wider between pipings, for adapting and protecting the feminine pelvic area.
Also available the standard width for men.
Knee rolls type. The saddle of the picture has been manufactured with TM-System (Thigh block), but you can choose among all these types of kneerolls:
SIZES:
- Rider: 17"- 17.5" - 18" (Check with us more available sizes)
- Horse: from 28 to 34 cm
Colours: Black, Havana, Brown, Dark London (check more color options).
APPROXIMATE MEASUREMENTS OF THIS SADDLE IN SIZE 17":
-Measurement of the seat: 43cm, from the cantle to the Zaldi nail.
-Length of the panel in the underside: 48cm
-Length of the flap (down from the stirrups bar): 40cm
-TM-System (Tight Block): 20cm high x 8.5cm wide x 9cm projection
-Weight: 7.800kgs
NOTICE: It is very important to send your order of a saddle with its configuration sheet properly filled. The saddle in the publicity picture, related to this reference on our website, is configured with the options marked in the following pictures. You can enlarge them to see them carefully.
#WeThinkSaddles
In Zaldi we consider the saddle as the joint element between horse and rider.
Following our T+T Tradition and Technology premise, into this cool new collection we have incorporated leading technological developments together with the most advanced veterinary and medical research, additionally applying the guidelines of the greatest saddle-fitters of international prestige. 50 years of experience as saddlers and our condition of manufacturers, allow us to launch this new line of customized saddles ¡We are saddlers!
The innovative dressage saddle ATLANTA of the picture has been manufacture with CHANGE saddletree (exchangeable gullets), deep for dressage, made of polypropylene EPDM. Saddletree guaranteed for 10 years. The new DUAL DENSITY anatomical tree for horse and rider allows for many features of rigidity, deformation and absorption of energy where needed in different areas. The new tree has the ability to adjust completely to the back of the horse. It expands and spreads the rider´s weight over the horse´s back, so avoiding pressure points. The top side of the tree has been optimized in design (0.5cm thick) for rider comfort, it is elastic, absorbs shock and allows free passage of the horse´s energy. The rider contact area is ergonomically designed, lifting the lateral areas to release pressure on the urethra, so avoiding possible health problems in later years and allowing full and unrestricted blood flow.
With 5-multiposition stirrup bar. With extracomfortable seat with White piping, stitching and cantle.
Made from boxcalf leather. Short intelligent panels, whither pad incorporated. Consisting of 1cm layer ´memory foam´ wither pad with moisture resistant wool filling to avoid lumps or voids.
With a long ergonomic dressage flap and Londres type knee pad sewn outside the flap.
Long dressage girth straps, with the position of multiposition girth straps for an easy and quick change.
The saddle of the picture is customized with the option "special saddle for woman", 1cm wider between pipings, for adapting and protecting the feminine pelvic area.
Also available the standard width for men.
Knee rolls type. The saddle of the picture has been manufactured with TM-System (Thigh block), but you can choose among all these types of kneerolls:
SIZES:
- Rider: 17"- 17.5" - 18" (Check with us more available sizes)
- Horse: from 28 to 34 cm
Colours: Black, Havana, Brown, Dark London (check more color options).
APPROXIMATE MEASUREMENTS OF THIS SADDLE IN SIZE 17":
-Measurement of the seat: 43cm, from the cantle to the Zaldi nail.
-Length of the panel in the underside: 48cm
-Length of the flap (down from the stirrups bar): 40cm
-TM-System (Tight Block): 20cm high x 8.5cm wide x 9cm projection
-Weight: 7.800kgs
NOTICE: It is very important to send your order of a saddle with its configuration sheet properly filled. The saddle in the publicity picture, related to this reference on our website, is configured with the options marked in the following pictures. You can enlarge them to see them carefully.
Alto:
Ancho:
Fondo:
Largo:
Ancho:
Fondo:
Largo:
