Hand made with 15 benefits to rider and horse.
Adaptable: choose tree, stirrup bar, seat, flaps, panels, knee rolls, girth straps and leather as you wish
1. New shock protection.
In viscoelastic ´memory foam´ with 4cms soft silicon.
2. An extra comfortable seat.
Made from 3 layers of rubber; 2 layers of ELAX high density silicon and one layer of latex.
3. With flexible, durable tree/seat.
New 2.5cms higher protection of croupon leather and moulded material to avoid damage to the tree in the event of a fall or knock.
4. New dual density tree, with different densities for horse and rider.
The anatomically designed tree made from polypropylene with EPDM and talc (EPDM is an extremely durable type of synthetic rubber, an elastomer. The E refers to ethylene, P to propylene, D to diene). The dual density tree allows for many characteristics of rigidity, deformation and absorption of energy where needed in different areas. This is the result of the continued process of Research and Development made in conjunction with CIDAUT (Foundation for Research and Development in Transport and Energy). This new tree has the ability to adjust completely to the back of the horse a development which together with the dual density gives benefits to both horse and rider. At the bottom part of the tree (1.5cms in thickness), the part that is contact with the horse´s back the foam is designed to expand and spread the rider´s weight over the horse´s back, so avoiding pressure points. With 10% elasticity to allow reverse rotation, so giving the horse full freedom of movement.
This is the product of years of study for the optimum density to distribute weight evenly across the horse´s back, to spread the pressure in a homogeneous way so to avoid overloading the dorsal muscle mass and in this way eliminating restrictions on pressure points that could degenerate into mechanical problems and pain for the horse.
Incorporating an open structure in the back and arms of the tree to allow full adaption for the back and neck. The top side of the tree has been optimized in design (0.5cms thick) for rider comfort, it is elastic, absorbs shock and allows free passage of the horse´s energy. It is durable and resistant in long term use. The weight of the rider, taken from the points of contact, is spread over the surface providing a feeling of weightlessness without pressure points. Spreading the weight evenly gives a positive result and makes riding more enjoyable.
The rider contact area is ergonomically designed, lifting the lateral areas to release pressure on the urethra, so avoiding possible health problems in later years and allowing full and unrestricted blood flow.
The top surface is slightly curved, to adapt to the rider and give optimum comfort while helping to push the pelvis forward and keep the back in a correct and comfortable riding position.
5. New Intelligent panels, with incorporated wither pad.
Consisting of 1cm layer ´memory foam´ wither pad with moisture resistant wool filling to avoid lumps or voids.
6. Comfortable trim. The trim where saddle and flaps join has been redesigned for comfort and to avoid pressure on the inside thigh when riding.
7. Ergonomic flaps. Helps the rider adjust to an optimum position.
8. Reinforced with an ´anti sanding´ effect. Made in croupon leather giving greater durability to the saddle.
9. Double sewn girth straps. Reinforced and double stitched with waxed thread for maximum strength.
10. The first girth strap is elasticated, for easy movement and to allow the horse to breathe freely whilst also releasing pressure on the horse´s back. The second girth strap is in a V configuration which is good in any saddle as it avoids saddle roll and helps to release pressure on the shoulder.
11. Knee rolls with air intake. The knee rolls contain a row of air holes to allow circulation of air which gives correct pressure and support at all times.
12. New anatomically shaped dual density knee roll, providing strength in the upper section and more flexibility in the lower part.
13. Anatomic panels. The new series of panels are made in a triangular shape for easy movement of the horse and to adapt to pressure caused by the rider´s weight.
14. Close contact effect. The flaps are attached directly to the panels, with 10cm stitching along the entire length to prevent displacement of the flaps in use.
15. Long Sprenger stirrup bars, at an angle of 45°, so hindering foot slippage from the stirrup. The top quality stirrup bars carry the Sprenger guarantee.
-SIZES:
-Rider: from 16" to 18" - 19" / -Horse from 28 to 34 cm.
APPROXIMATE MEASUREMENTS OF THIS SADDLE IN SIZE 16"
-Measurement of the seat: 41cm, from the cantle to the Zaldi nail.
-Length of the panel in the underside: 46cm
-Length of the flap (down from the stirrups bar): 38cm
-Kneepad: 36cm high x 10cm wide x 6cm projection (also available with TM-System 20cmx8.5cmx9cm) or with medium kneepad (34cmx7cmx4.5cm) - SEE CONFIRGURATION SHEET
-Weight: 7.400kgs
NOTICE: It is very important to send your order of a saddle with its configuration sheet properly filled. The saddle in the publicity picture, related to this reference on our website, is configured with the options marked in the following pictures. You can enlarge them to see them carefully.
Adaptable: choose tree, stirrup bar, seat, flaps, panels, knee rolls, girth straps and leather as you wish
1. New shock protection.
In viscoelastic ´memory foam´ with 4cms soft silicon.
2. An extra comfortable seat.
Made from 3 layers of rubber; 2 layers of ELAX high density silicon and one layer of latex.
3. With flexible, durable tree/seat.
New 2.5cms higher protection of croupon leather and moulded material to avoid damage to the tree in the event of a fall or knock.
4. New dual density tree, with different densities for horse and rider.
The anatomically designed tree made from polypropylene with EPDM and talc (EPDM is an extremely durable type of synthetic rubber, an elastomer. The E refers to ethylene, P to propylene, D to diene). The dual density tree allows for many characteristics of rigidity, deformation and absorption of energy where needed in different areas. This is the result of the continued process of Research and Development made in conjunction with CIDAUT (Foundation for Research and Development in Transport and Energy). This new tree has the ability to adjust completely to the back of the horse a development which together with the dual density gives benefits to both horse and rider. At the bottom part of the tree (1.5cms in thickness), the part that is contact with the horse´s back the foam is designed to expand and spread the rider´s weight over the horse´s back, so avoiding pressure points. With 10% elasticity to allow reverse rotation, so giving the horse full freedom of movement.
This is the product of years of study for the optimum density to distribute weight evenly across the horse´s back, to spread the pressure in a homogeneous way so to avoid overloading the dorsal muscle mass and in this way eliminating restrictions on pressure points that could degenerate into mechanical problems and pain for the horse.
Incorporating an open structure in the back and arms of the tree to allow full adaption for the back and neck. The top side of the tree has been optimized in design (0.5cms thick) for rider comfort, it is elastic, absorbs shock and allows free passage of the horse´s energy. It is durable and resistant in long term use. The weight of the rider, taken from the points of contact, is spread over the surface providing a feeling of weightlessness without pressure points. Spreading the weight evenly gives a positive result and makes riding more enjoyable.
The rider contact area is ergonomically designed, lifting the lateral areas to release pressure on the urethra, so avoiding possible health problems in later years and allowing full and unrestricted blood flow.
The top surface is slightly curved, to adapt to the rider and give optimum comfort while helping to push the pelvis forward and keep the back in a correct and comfortable riding position.
5. New Intelligent panels, with incorporated wither pad.
Consisting of 1cm layer ´memory foam´ wither pad with moisture resistant wool filling to avoid lumps or voids.
6. Comfortable trim. The trim where saddle and flaps join has been redesigned for comfort and to avoid pressure on the inside thigh when riding.
7. Ergonomic flaps. Helps the rider adjust to an optimum position.
8. Reinforced with an ´anti sanding´ effect. Made in croupon leather giving greater durability to the saddle.
9. Double sewn girth straps. Reinforced and double stitched with waxed thread for maximum strength.
10. The first girth strap is elasticated, for easy movement and to allow the horse to breathe freely whilst also releasing pressure on the horse´s back. The second girth strap is in a V configuration which is good in any saddle as it avoids saddle roll and helps to release pressure on the shoulder.
11. Knee rolls with air intake. The knee rolls contain a row of air holes to allow circulation of air which gives correct pressure and support at all times.
12. New anatomically shaped dual density knee roll, providing strength in the upper section and more flexibility in the lower part.
13. Anatomic panels. The new series of panels are made in a triangular shape for easy movement of the horse and to adapt to pressure caused by the rider´s weight.
14. Close contact effect. The flaps are attached directly to the panels, with 10cm stitching along the entire length to prevent displacement of the flaps in use.
15. Long Sprenger stirrup bars, at an angle of 45°, so hindering foot slippage from the stirrup. The top quality stirrup bars carry the Sprenger guarantee.
-SIZES:
-Rider: from 16" to 18" - 19" / -Horse from 28 to 34 cm.
APPROXIMATE MEASUREMENTS OF THIS SADDLE IN SIZE 16"
-Measurement of the seat: 41cm, from the cantle to the Zaldi nail.
-Length of the panel in the underside: 46cm
-Length of the flap (down from the stirrups bar): 38cm
-Kneepad: 36cm high x 10cm wide x 6cm projection (also available with TM-System 20cmx8.5cmx9cm) or with medium kneepad (34cmx7cmx4.5cm) - SEE CONFIRGURATION SHEET
-Weight: 7.400kgs
NOTICE: It is very important to send your order of a saddle with its configuration sheet properly filled. The saddle in the publicity picture, related to this reference on our website, is configured with the options marked in the following pictures. You can enlarge them to see them carefully.
Alto:
Ancho:
Fondo:
Largo:
Ancho:
Fondo:
Largo:
Leather colours
It is impossible to get two items made of tan, dark tan, brown or Havana leather exactly the same colour.
Every piece of leather is different
A saddle is made from different types of leather, some parts of the saddle – for example seat, flaps, panels, girth straps, require leather giving different characteristics compared to other parts. We need to use different leather types for different parts, which means leather from different animals, different suppliers, different tanning processes or tints. So it is impossible to achieve exactly the same colour.
For a group of products such as a saddle, bridle, girth, reins there will always be different nuances in colour. So for example a tan bridle, saddle and girth will be in a tan spectrum but there will be variations in the actual colour, including the saddle which has to be made of different grades of leather, giving different shades.
It is the same with clothing, a cotton polo shirt in blue, will be a different shade to a blue jumper or a pair of trousers. All will be blue but different shades of colour because of the different materials.
So when ordering a saddle, or any other leather item, it is necessary to take into account that it is not possible to guarantee an exact match of colour.
The colours shown in the catalogue photographs are for guidance
In our catalogue (including social media and our website www.zaldi.com) we use digital printing to show the ranges of colours available, but this is for guidance as the colours can vary depending on the set up of each computer screen or mobile phone display. Also taking into account the differences in perception from one person’s eye to another we can only give the colours as a guide. To get a 100% colour match to the original is impossible.
0 MINUTE
When you put your new saddle on the horse, it seems that it does not fit at all… It is necessary a bit of time for it to fit… Relax!
1-15’ MINUTES
Girth your saddle, although it will be a bit loose and it seems it does not fit yet. Don’t despair! Get on the horse…
15 - 60’ MINUTES
The panels start to adapt to the back of the horse in the correct way. It is possible now to girth it one or two holes tighter.
5 - 10 HOURS
While riding, the saddle continues to adapt. The distribution through the panels of our weight helps to reach a perfect a fitting and adaptation. We can adjust the girth a bit more.
+15 H HOURS
We get an ideal fitting. We feel comfortable on the saddle while it rests/leans where and how it should on the back of the horse. We can now adjust the girth firmly.
DON´T DESPAIR!! Remember that there is a necessary fitting time. Trust ZALDI!!!
Hand made with 15 benefits to rider and horse.
Adaptable: choose tree, stirrup bar, seat, flaps, panels, knee rolls, girth straps and leather as you wish
1. New shock protection.
In viscoelastic ´memory foam´ with 4cms soft silicon.
2. An extra comfortable seat.
Made from 3 layers of rubber; 2 layers of ELAX high density silicon and one layer of latex.
3. With flexible, durable tree/seat.
New 2.5cms higher protection of croupon leather and moulded material to avoid damage to the tree in the event of a fall or knock.
4. New dual density tree, with different densities for horse and rider.
The anatomically designed tree made from polypropylene with EPDM and talc (EPDM is an extremely durable type of synthetic rubber, an elastomer. The E refers to ethylene, P to propylene, D to diene). The dual density tree allows for many characteristics of rigidity, deformation and absorption of energy where needed in different areas. This is the result of the continued process of Research and Development made in conjunction with CIDAUT (Foundation for Research and Development in Transport and Energy). This new tree has the ability to adjust completely to the back of the horse a development which together with the dual density gives benefits to both horse and rider. At the bottom part of the tree (1.5cms in thickness), the part that is contact with the horse´s back the foam is designed to expand and spread the rider´s weight over the horse´s back, so avoiding pressure points. With 10% elasticity to allow reverse rotation, so giving the horse full freedom of movement.
This is the product of years of study for the optimum density to distribute weight evenly across the horse´s back, to spread the pressure in a homogeneous way so to avoid overloading the dorsal muscle mass and in this way eliminating restrictions on pressure points that could degenerate into mechanical problems and pain for the horse.
Incorporating an open structure in the back and arms of the tree to allow full adaption for the back and neck. The top side of the tree has been optimized in design (0.5cms thick) for rider comfort, it is elastic, absorbs shock and allows free passage of the horse´s energy. It is durable and resistant in long term use. The weight of the rider, taken from the points of contact, is spread over the surface providing a feeling of weightlessness without pressure points. Spreading the weight evenly gives a positive result and makes riding more enjoyable.
The rider contact area is ergonomically designed, lifting the lateral areas to release pressure on the urethra, so avoiding possible health problems in later years and allowing full and unrestricted blood flow.
The top surface is slightly curved, to adapt to the rider and give optimum comfort while helping to push the pelvis forward and keep the back in a correct and comfortable riding position.
5. New Intelligent panels, with incorporated wither pad.
Consisting of 1cm layer ´memory foam´ wither pad with moisture resistant wool filling to avoid lumps or voids.
6. Comfortable trim. The trim where saddle and flaps join has been redesigned for comfort and to avoid pressure on the inside thigh when riding.
7. Ergonomic flaps. Helps the rider adjust to an optimum position.
8. Reinforced with an ´anti sanding´ effect. Made in croupon leather giving greater durability to the saddle.
9. Double sewn girth straps. Reinforced and double stitched with waxed thread for maximum strength.
10. The first girth strap is elasticated, for easy movement and to allow the horse to breathe freely whilst also releasing pressure on the horse´s back. The second girth strap is in a V configuration which is good in any saddle as it avoids saddle roll and helps to release pressure on the shoulder.
11. Knee rolls with air intake. The knee rolls contain a row of air holes to allow circulation of air which gives correct pressure and support at all times.
12. New anatomically shaped dual density knee roll, providing strength in the upper section and more flexibility in the lower part.
13. Anatomic panels. The new series of panels are made in a triangular shape for easy movement of the horse and to adapt to pressure caused by the rider´s weight.
14. Close contact effect. The flaps are attached directly to the panels, with 10cm stitching along the entire length to prevent displacement of the flaps in use.
15. Long Sprenger stirrup bars, at an angle of 45°, so hindering foot slippage from the stirrup. The top quality stirrup bars carry the Sprenger guarantee.
-SIZES:
-Rider: from 16" to 18" - 19" / -Horse from 28 to 34 cm.
APPROXIMATE MEASUREMENTS OF THIS SADDLE IN SIZE 16"
-Measurement of the seat: 41cm, from the cantle to the Zaldi nail.
-Length of the panel in the underside: 46cm
-Length of the flap (down from the stirrups bar): 38cm
-Kneepad: 36cm high x 10cm wide x 6cm projection (also available with TM-System 20cmx8.5cmx9cm) or with medium kneepad (34cmx7cmx4.5cm) - SEE CONFIRGURATION SHEET
-Weight: 7.400kgs
NOTICE: It is very important to send your order of a saddle with its configuration sheet properly filled. The saddle in the publicity picture, related to this reference on our website, is configured with the options marked in the following pictures. You can enlarge them to see them carefully.
Adaptable: choose tree, stirrup bar, seat, flaps, panels, knee rolls, girth straps and leather as you wish
1. New shock protection.
In viscoelastic ´memory foam´ with 4cms soft silicon.
2. An extra comfortable seat.
Made from 3 layers of rubber; 2 layers of ELAX high density silicon and one layer of latex.
3. With flexible, durable tree/seat.
New 2.5cms higher protection of croupon leather and moulded material to avoid damage to the tree in the event of a fall or knock.
4. New dual density tree, with different densities for horse and rider.
The anatomically designed tree made from polypropylene with EPDM and talc (EPDM is an extremely durable type of synthetic rubber, an elastomer. The E refers to ethylene, P to propylene, D to diene). The dual density tree allows for many characteristics of rigidity, deformation and absorption of energy where needed in different areas. This is the result of the continued process of Research and Development made in conjunction with CIDAUT (Foundation for Research and Development in Transport and Energy). This new tree has the ability to adjust completely to the back of the horse a development which together with the dual density gives benefits to both horse and rider. At the bottom part of the tree (1.5cms in thickness), the part that is contact with the horse´s back the foam is designed to expand and spread the rider´s weight over the horse´s back, so avoiding pressure points. With 10% elasticity to allow reverse rotation, so giving the horse full freedom of movement.
This is the product of years of study for the optimum density to distribute weight evenly across the horse´s back, to spread the pressure in a homogeneous way so to avoid overloading the dorsal muscle mass and in this way eliminating restrictions on pressure points that could degenerate into mechanical problems and pain for the horse.
Incorporating an open structure in the back and arms of the tree to allow full adaption for the back and neck. The top side of the tree has been optimized in design (0.5cms thick) for rider comfort, it is elastic, absorbs shock and allows free passage of the horse´s energy. It is durable and resistant in long term use. The weight of the rider, taken from the points of contact, is spread over the surface providing a feeling of weightlessness without pressure points. Spreading the weight evenly gives a positive result and makes riding more enjoyable.
The rider contact area is ergonomically designed, lifting the lateral areas to release pressure on the urethra, so avoiding possible health problems in later years and allowing full and unrestricted blood flow.
The top surface is slightly curved, to adapt to the rider and give optimum comfort while helping to push the pelvis forward and keep the back in a correct and comfortable riding position.
5. New Intelligent panels, with incorporated wither pad.
Consisting of 1cm layer ´memory foam´ wither pad with moisture resistant wool filling to avoid lumps or voids.
6. Comfortable trim. The trim where saddle and flaps join has been redesigned for comfort and to avoid pressure on the inside thigh when riding.
7. Ergonomic flaps. Helps the rider adjust to an optimum position.
8. Reinforced with an ´anti sanding´ effect. Made in croupon leather giving greater durability to the saddle.
9. Double sewn girth straps. Reinforced and double stitched with waxed thread for maximum strength.
10. The first girth strap is elasticated, for easy movement and to allow the horse to breathe freely whilst also releasing pressure on the horse´s back. The second girth strap is in a V configuration which is good in any saddle as it avoids saddle roll and helps to release pressure on the shoulder.
11. Knee rolls with air intake. The knee rolls contain a row of air holes to allow circulation of air which gives correct pressure and support at all times.
12. New anatomically shaped dual density knee roll, providing strength in the upper section and more flexibility in the lower part.
13. Anatomic panels. The new series of panels are made in a triangular shape for easy movement of the horse and to adapt to pressure caused by the rider´s weight.
14. Close contact effect. The flaps are attached directly to the panels, with 10cm stitching along the entire length to prevent displacement of the flaps in use.
15. Long Sprenger stirrup bars, at an angle of 45°, so hindering foot slippage from the stirrup. The top quality stirrup bars carry the Sprenger guarantee.
-SIZES:
-Rider: from 16" to 18" - 19" / -Horse from 28 to 34 cm.
APPROXIMATE MEASUREMENTS OF THIS SADDLE IN SIZE 16"
-Measurement of the seat: 41cm, from the cantle to the Zaldi nail.
-Length of the panel in the underside: 46cm
-Length of the flap (down from the stirrups bar): 38cm
-Kneepad: 36cm high x 10cm wide x 6cm projection (also available with TM-System 20cmx8.5cmx9cm) or with medium kneepad (34cmx7cmx4.5cm) - SEE CONFIRGURATION SHEET
-Weight: 7.400kgs
NOTICE: It is very important to send your order of a saddle with its configuration sheet properly filled. The saddle in the publicity picture, related to this reference on our website, is configured with the options marked in the following pictures. You can enlarge them to see them carefully.
Alto:
Ancho:
Fondo:
Largo:
Ancho:
Fondo:
Largo:
You might also like
